Alumina 3% Titania


CT1104-1 an Aluminum Oxide ceramic coating designed to produce relatively thick coatings. It is often used as the abrasive coating in jet engine clearance control coating systems. It resists heat up to 2000º F. CT1104-1 is normally applied over a metallic bond coat. It is gray in color due to the Titanium Oxide that is included in the chemistry.

Typical Properties

Nominal Composition:
94% Al2O3, 2.5% TiO2, 2% SiO2, other oxides (Bal.)
Bond Strength:
1,000 psi over bond coat
Coating Porosity:
Coating Hardness:
As-sprayed Surface Roughness:
700 Ra

For the Following Applications:

CT1104-1 is used as an abrasive coating in jet engine compressors, paired with an abradable coating in order to improve the air seal between two components. It may also have some use in foundry applications for resistance to molten zinc, aluminum, and copper.


Finish CT1104-1 by grinding with green silicon carbide or diamond wheels. CT1104-1 may be wet or dry ground. CTS can recommend grinding parameters if needed.


CT-1104-1 meets the following specifications:

Want to learn more about CTS’ capabilities and thermal coating solutions?

Contact us today to consult directly with one of our representatives or certified engineers and discover how we can help you attain efficiency, productivity, and protection within 24 hours.