Nickel Chromium Aluminum Yttrium (NiCrAlY)


CT5100-1 is one of a number of coatings referred to as MCrAlY’s where “M” is typically Co, Ni, Fe, or a combination thereof. CT5100-1 is an alloy of Nickel, Chrome, Aluminum, and Yttrium “NiCrAlY” and is applied by the Plasma spray process. At elevated temperatures this coating forms a tenacious oxide layer that serves to protect the underlying substrate from oxidation and corrosion damage.

Typical Properties

Nominal Composition:
67% Ni – 22% Cr – 10% Al – 1% Y
Physical Appearance:
Dull Grey
Typical Thickness:
.005” - .015”
Coating Density:
Tensile Strength:
>10,000 psi avg.
As-sprayed Surface Roughness:
350-500 Ra
Typical Max Operating Temp:

For the Following Applications:

CT5100-1 is typically used as a bond coating in thermal barrier applications. The coating serves two purposes in a thermal barrier system:

1) In the as sprayed condition, it provides a suitable surface for application various ceramic top coats.

2) It serves as an effective barrier against oxidation and corrosion of the underlying substrate material.

This coating is most commonly used on gas turbine engine hot section components (liners, caps, venturis, transition pieces, vanes, and blades).


CT5100 is typically used as sprayed without further finishing.


CT-5100-1 meets the following specifications:

Want to learn more about CTS’ capabilities and thermal coating solutions?

Contact us today to consult directly with one of our representatives or certified engineers and discover how we can help you attain efficiency, productivity, and protection within 24 hours.